Ronseal Interior Varnish

Ronseal Interior Varnish

Features:

  • Fast Drying 
  • Natural Finish 
  • Low Odour Formula 
  • Interior Use 
From €9.15
Delivery in
1-2 days
SKU
36821-x
Brand
Ronseal

Ronseal Interior Varnish provides beautiful, natural-looking protection for wooden furniture, skirting boards, and interior woodwork.

Designed with diamond hard protection, it stands up to everyday knocks, scuffs, and wear while preserving the natural tones of your wood.

With a fast 20-minute drying time and a low-odour formula, it allows you to protect your wood quickly and comfortably without disrupting your home.

Features:
  • Diamond hard protection for everyday wear and tear
  • Enhances and preserves the natural look of wood
  • Long-lasting interior protection
  • Fast Drying – Ready in just 20 minutes
  • Natural Finish. Maintains wood’s natural tones
  • Low Odour Formula. Minimal smell during and after application
  • Interior Use – Perfect for furniture and interior woodwork
Before you Start:
  • Suitable for bare or previously varnished wood
  • Not suitable for painted wood
  • Ensure the room is warm and well ventilated
  • Open doors or windows if required
  • Wear a dust mask when sanding to protect from sawdust
  • Wipe the surface with a cloth and white spirit to remove wax, grease, dirt, and oil
  • Lightly sand using 120-grit sandpaper to smooth rough areas
  • Remove any peeling, loose, or flaking old coatings
  • Allow dust to settle, then wipe with a damp cloth
  • Leave the wood to dry completely before varnishing
Application:
  • Stir the varnish thoroughly to remove any lumps
  • Test on a hidden area to check the final appearance
  • Apply an even coat using a brush, following the direction of the wood grain
  • Allow 1 hour drying time between coats
  • Apply 2–3 coats for full protection
  • Before the final coat, lightly sand and remove dust
  • Apply the final coat for a smooth, flawless finish
Aftercare - Cleaning:
  • Once fully dry, clean surfaces as normal
  • Remove dirt or grit promptly to avoid damaging the finish
Repair:
  • Lightly sand the damaged area until smooth
  • Reapply 2–3 coats of varnish
  • Leave to dry for a refreshed, like-new finish
FAQs:

What surfaces can Ronseal Interior Varnish be used on?
It’s suitable for bare or previously varnished interior wood such as furniture and skirting boards.

Can it be used on painted wood?
No, this varnish is not suitable for painted surfaces.

How long does it take to dry?
The varnish dries in approximately 20 minutes.

How many coats are required?
Two to three coats are recommended for full coverage and protection.

Does it change the colour of the wood?
It may slightly deepen the tone while enhancing the wood’s natural colour.