Ronseal Diamond Hard Floor Varnish Mellow

Ronseal Diamond Hard Floor Varnish Mellow

Features:
  • Diamond Hard Protection
  • Mellow Finish 
  • Fast Drying 
  • Available in 2.5 litre and 5 litre
  • Satin or Gloss finish
From €58.51
Delivery in
1-2 days
SKU
36521-x
Brand
Ronseal

Ronseal Diamond Hard Floor Varnish Mellow is designed to protect busy wooden floors while enhancing their natural beauty.

This tough, non-yellowing polyurethane varnish delivers long-lasting resistance against everyday knocks, scuffs, spills, heat, water, and household chemicals.

With a fast 30-minute drying time, low odour formula, and coverage of up to 18m² per litre, it’s ideal for keeping your home looking great without disruption.

Suitable for both unvarnished and previously varnished wooden floors, it provides a rich, clear satin finish that lasts.

 

Features:
  • Diamond Hard Protection. Ultra-tough polyurethane formula for high-traffic floors
  • Mellow Satin Finish. Enhances the natural look of wood
  • Fast Drying. Minimises downtime in busy homes
  • Non-Yellowing. Maintains colour and clarity over time
  • Low Odour. No lingering varnish smell
  • High Coverage. Covers up to 18m² per litre
  • Tough floor varnish with a beautiful mellow satin finish
  • Protects against knocks, scuffs, spills, heat, and chemicals
  • Touch dry in 30 minutes
  • Ready for a second coat in just 2 hours
  • Suitable for new and previously varnished wooden floors
Before you Start:
  • Ensure the room is warm and well ventilated
  • Open doors or windows to allow fresh airflow
  • Wear a dust mask when sanding to protect from sawdust
  • Make sure floors are clean, dry, and free from dust
  • Remove any wax, oil, or grease using white spirit and a clean cloth
Preparation:
  • Thorough preparation ensures a smooth, long-lasting finish
  • Clean the surface thoroughly to remove contaminants
  • Lightly sand the floor using 120-grit sandpaper
  • If previously varnished, remove any cracked, peeling, or flaking areas
  • Vacuum and wipe down the surface before application
Application:
  • Stir the varnish well before use for an even consistency
  • Apply with a brush, following the direction of the wood grain
  • Allow the first coat to dry for 6 hours
  • Apply the second coat and leave for another 6 hours
  • Lightly sand before the final coat
  • Remove dust with a slightly damp cloth
  • Apply the third and final coat for maximum durability
Aftercare:
  • Allow the varnish to fully cure before regular use
  • Clean floors as normal using non-abrasive cleaners
  • Remove dirt and grit promptly to avoid surface damage
Repair:
  • Lightly sand the damaged area
  • Clean away dust
  • Reapply three coats of varnish to restore protection and appearance
FAQs

Is Ronseal Diamond Hard Floor Varnish suitable for high-traffic areas?
Yes, it’s specifically designed for floors that receive heavy daily use.

How long does it take to dry?
It is touch dry in 30 minutes and ready for a second coat after 2 hours.

Will this varnish yellow over time?
No, it has a non-yellowing formula that keeps floors looking brighter for longer.

Can it be used on previously varnished floors?
Yes, as long as the surface is properly prepared and lightly sanded.

How many coats are recommended?
Three coats are recommended for the best protection and finish.

You Might Also Like!