Sika Fastfix Paving Jointing Compound
Sika® FastFix All Weather is a ready-to-use, self-setting paving jointing compound with Active Resin Technology for advanced durability.
It sets hard & will not wash out, whilst remaining water permeable.
Sika® FastFix All Weather is perfect for outdoor patios, pavements and paths with joints over 5mm wide and 20mm deep.
Fast and easy to use, it can be applied in any weather conditions even in the rain.
Sika® FastFix All Weather can also be stored and reused after opening to reduce waste.
- For joints over 5mm wide and 20mm deep
- Fast and easy application – no mixing
- All weather – apply even in the rain
- Includes weed suppressant
- Robust - does not shrink or crack
- Highly water permeable – no pooling on the patio
Please note:
- If you are unsure of what colour to use then contact us on 0818 888 000 | 071 918 9841 and we will send a sample out to you
- You should do a small test area first so that you can be satisfied that you are happy with the colour
- The width and depth of the joints between the flags / pavings must be over 5mm wide and 20mm deep
Suitable for use on:
- Flagstones
- Cobbles
- Indian sandstone
- Stone setts
- Paving blocks
- Slabs
- Footpaths
- Patios
- Pavements
- Driveways with light vehicular traffic
Storage Conditions:
Store in cool, dry conditions.
Once opened use within 1 hour or store in the bucket, immersed in water, for up to 1 month.
Application information:
Initial Set Time 6-12 hours above 15°C in dry conditions.
Setting Time Allow up to 5 days for full set in temperatures between 4°C and 15°
Consumption:
- Yield;
- 15kg Buff: approx. 21m2 450mm x 450mm paving (5mm x 20mm joints)
- 14kg Grey: approx. 20m2 450mm x 450mm paving (5mm x 20mm joints)
- 15kg Charcoal
How to apply:
- Ensure the paving is installed as per watchpoints leaflet and all joints to be pointed with Sika FastFix® All Weather are free from standing water, dirt, debris or weeds.
The dimensions of the joints must allow for a full compaction of the material once applied.
The minimum joint depth should be at least 20mm and the joint width 5mm.
- Thoroughly wet the entire area where Sika FastFix® All Weather is to be applied with water.
This includes not only the joints, but also the entire slabs.
Allow any standing water to drain before Sika FastFix® All Weather is applied.
- Remove the product from the packaging and cut the foil pack.
Once punctured or opened the material must be used within one hour.
Any unused material can be stored in the bucket, immersed in water, for up to 1 month.
- Use Sika FastFix® All Weather in small manageable amounts.
Avoid spreading over a large area before application.
Ensure material is all loose by raking through.
Do not try to break up and use any small set lumps.
Do not add any extra sand.
- Using a soft broom, or hand brush for smaller areas, work Sika FastFix® All Weather into the joints.
Make sure each joint is completely filled.
If the freshly laid product is flooded, for instance due to rain, the setting period might be extended.
- Using a suitable pointing trowel make sure the freshly applied Sika FastFix® All Weather is thoroughly compacted within the joints.
The process should also smoothen/flatten the surface to the desired level.
The step of thorough compaction is essential.
- Sika FastFix® All Weather will start to set in 6-12 hours above 15°C in dry conditions.
Allow up to 5 days for full set in temperatures between 4°C and 15°C.
Contact with rain or moisture can temporarily soften the product if wetted before full set.
Cleaning of tools:
Clean tools immediately after use with warm, soapy water.
