Frenchic Finishing Coat is a hard-wearing, water-based protective top coat designed to seal painted furniture, wood and other suitable surfaces.
It dries clear with a soft satin sheen, providing a durable protective finish for furniture and decorative projects.
Suitable for interior and exterior applications, Frenchic Finishing Coat is particularly useful on surfaces exposed to everyday wear and occasional splashes.
It provides a hard-wearing alternative to furniture wax and is ideal for sealing Frenchic Original Artisan Chalk & Mineral Furniture Paint.
Frenchic Finishing Coat can also be used to seal porous wood and MDF before painting, helping prepare the surface and limit bleed-through where appropriate.
It is particularly useful for furniture restoration, decorative painting and craft projects.
Finishing Coat can also be used to adhere and seal decoupage designs or as a mixing medium for Frenchic Frensheen metallic powders.
Frenchic confirms EN71-3 certification for use on children's toys when applied in accordance with the manufacturer's instructions.
Key Features
- Hard-wearing, water-based protective top coat
- Dries clear with a soft satin sheen
- Suitable for interior and exterior applications
- Provides a durable protective finish for painted furniture
- Ideal for sealing Frenchic Original Artisan paint
- Suitable for sealing porous wood and MDF
- Helps limit bleed-through on suitable wooden surfaces
- More hard-wearing than furniture wax, according to Frenchic
- Suitable for decoupage and decorative craft projects
- Can be used with Frenchic Frensheen metallic powders
- EN71-3 certified according to Frenchic
- 500ml bottle
Frenchic Finishing Coat Video
General Information
- Product type: clear protective top coat and sealant
- Finish: clear satin
- Water-based formulation
- Suitable for interior and exterior use
- Designed for painted furniture, wood and compatible porous surfaces
- Suitable for sealing Frenchic Original Artisan paint
- Can be used to prepare porous wood and MDF before painting
- Helps limit bleed-through on suitable surfaces
- Suitable for decorative finishes, decoupage and craft projects
- Can be used as a mixing medium for Frenchic Frensheen metallic powders
- EN71-3 certified according to Frenchic
- 500ml bottle
Coverage
A 500ml bottle provides approximately 7–8m² of coverage per coat, depending on the porosity and condition of the surface.
A minimum of two coats is required according to Frenchic's product guidance.
Porous surfaces, including bare wood and MDF, may absorb more product and require additional coats.
Actual coverage will depend on surface preparation, absorbency and application thickness.
Surface Preparation
Ensure surfaces are clean, dry, sound and free from grease, wax, loose paint and other contaminants before application.
Remove any loose or flaking coatings from previously painted surfaces.
Clean surfaces thoroughly and allow them to dry completely before applying Finishing Coat.
Lightly sand surfaces where appropriate to provide a suitable key for adhesion.
Remove all sanding dust before applying the product.
When applying over freshly painted furniture, allow the underlying paint to dry sufficiently according to the relevant Frenchic paint instructions.
For porous wood and MDF, Finishing Coat may be used as part of the surface preparation process before painting.
Additional preparation or treatment may be necessary for surfaces affected by staining or bleed-through.
Application and Drying
Stir the product thoroughly before use, following the manufacturer's instructions.
Apply evenly using an appropriate good-quality brush or applicator.
Avoid excessive application, overworking the product or allowing it to pool on the surface.
Apply a minimum of two coats to achieve the intended protective finish.
Allow each coat to dry according to Frenchic's current drying and recoating instructions before applying the next coat.
Additional coats may be required depending on surface porosity and the desired finish.
Allow the finished surface to dry thoroughly before returning it to normal use.
Curing and Durability
Allow freshly coated surfaces sufficient time to cure according to the manufacturer's instructions.
Handle newly finished furniture carefully while the protective coating is curing.
Avoid heavy use, abrasion, excessive cleaning and prolonged moisture exposure until the coating has achieved its intended hardness.
For exterior applications, follow Frenchic's preparation, application and curing recommendations and ensure suitable weather conditions.
Finished surfaces may require occasional maintenance depending on exposure, use and wear.
Cleaning and Storage
Reseal the container securely after use.
Clean brushes and application equipment according to the manufacturer's instructions.
Clean up spills promptly using the recommended cleaning method.
Store the product in its original container, protected from unsuitable temperatures and storage conditions.
Need Help Choosing Frenchic Finishing Products?
Contact My Building Supplies for advice on Frenchic Finishing Coat, furniture paint, surface preparation and decorative finishing products.
My Building Supplies: 0818 888 000 | 071 918 9841