FC1 Ultimate Patch and Fill Compound 1 Litre

Deep repairs, smooth results

Key Features:
  • Ready mixed for easy application
  • Fills gaps up to 75mm deep
  • No slumping, sagging or shrinking
  • Smooth finish without sanding
  • Paintable in as little as one hour, conditions permitting
€17.54
Delivery:
2 -3 Days
SKU
1LFCT1
Brand
CT1

Repair cracks, scratches and deep gaps with FC1 Ultimate Patch & Fill Compound, an ultra-lightweight, ready-mixed filler designed to make decorating preparation easier.

Fill repairs up to 75mm deep in one application, without building up multiple layers.

The non-slumping, non-sagging formulation stays where you apply it, even on ceilings, and will not shrink as it dries.

Achieve a smooth finish with less effort

Get a super-smooth finish without sanding by smoothing the filler with a lightly dampened filling knife.

The super-white formulation can be overpainted with water-based paint in as little as one hour, depending on the application and drying conditions.

Suitable for interior and exterior repairs, FC1 helps prepare damaged surfaces for painting and papering.

Exterior repairs require protection during curing and sealing with oil-based paint once fully cured.

Key features:
  • Ready mixed: apply directly from the tub.
  • Deep filling: repairs gaps and depressions up to 75mm deep.
  • Stays in place: no slumping, sagging or shrinking.
  • Smooth finish: no sanding required, although it can be sanded if desired.
  • Fast decorating: overpaintable with water-based paint in as little as one hour, depending on conditions.
  • Ultra-lightweight formulation: contains high-strength microspheres.
  • Versatile repairs: suitable for cracks, gaps, joints and surface scratches.
  • Drillable: once cured.
  • Very low VOC: flexible and crack resistant.
  • 1-litre tub: super-white finish with coverage up to 1.75m² at 3mm depth.
  • Product Information
Frequently asked questions:
How deep can FC1 fill in one application?

FC1 can fill gaps and depressions up to 75mm deep without the need to build up layers.

How soon can I paint over it?

Water-based primers and paints can be applied in as little as one hour, depending on the application, temperature and humidity.

Deep repairs take longer to dry throughout.

Allow the filler to cure fully before applying oil-based paint.

Does it need sanding?

No sanding is required when the filler is applied and smoothed correctly.

Use a lightly dampened filling knife to smooth the surface without overwetting it.

It can also be sanded once dry if required.

Can I use it outdoors or in damp areas?

FC1 is suitable for exterior repairs, but must not be applied to permanently damp or wet surfaces.

Protect exterior repairs from rain, water and temperatures below 5°C during curing.

Once fully cured, seal the repair with oil-based paint to protect it from weathering.

How should I prepare the surface?

Surfaces must be clean, dry and free from dust, grease and loose material.

Slightly enlarge hairline cracks to help the filler penetrate, and lightly abrade glossy surfaces.

Very dusty surfaces require diluted PVA preparation in accordance with the manufacturer's instructions.

Metal surfaces, including screw heads, require a suitable primer or oil-based paint before filling.

Can I keep leftover filler for another repair?

Yes, replace the internal plastic cover and secure the lid after use.

Store in a cool, dry place and protect from frost.

The stated shelf life is 12 months.