Dual Coil 200 Litre Stainless Steel Cylinder from Joule suitable for Solar, Gas and Oil

Stainless Steel Cylinder 200L Dual Coil from Joule

Key features:
  • Dual Coil 3/4" for solar and oil/gas
  • Suitable for house with 3 / 4 bedrooms
  • 200 Litres
  • Stainless Steel Cylinder
Enter Eircode at checkout for delivery pricing.
€955.00
Bulky Product
Delivery in
2-3 Days
SKU
SSC200DCCWEX
Brand
Joule
  • Stainless Steel Cylinder Joule model TCIMVS-0200NFC
  • 200 Litre model
  • Dual Coil 3/4" for solar and oil/gas
  • Suitable for house with 3 / 4 bedrooms

Dimensions: 1080mm high x 560mm wide

This has a factory fitted single immersion.

If you need some help in understanding what might be the best type of cylinder for you then you can read our helpful guide here

The Cyclone brand is noted for its attractive grey finish.

Noticeably there is no cheap plastic used on the outer casing.

Inside only the best materials are used, duplex stainless steel body, 316L grade stainless fittings and coils.

For heat pump ready cylinders the coil quality sets this apart.

Unlike most cheaper brands on the market Cyclone High Gain range of cylinders use high recovery smooth tube coils for optimal performance.

No other coil type on the market today offers the same transfer rate as smooth stainless tube.

Key features:

  • Boiler and Solar high recovery coil
  • Smooth tube coil construction for durability and performance
  • Compression connections fitted as standard
  • Bevelled stat pocket for better fitting
  • 9mm Solar stat pockets for PT1000 solar probes
  • Metallic grey wipe clean rigid case for premium appearance
  • Pre plugged secondary tapping for ease of installation
  • All Connections clearly labelled
  • Butt Welded process used throughout
  • Robotically welded
  • Branded quality components

Please note that this model is not suitable for use with well water.

There is a specific model suited to well water and you can contact us on 0818 888 000 for more information should that be required.

Twin Solar information:

Joule Cyclone range of hot water cylinders have been designed to work with any solar system.

The twin solar cylinders are manufactured with 9mm sensor pockets for the solar controller to ensure that the solar systems performs at its optimum level.

Product specification:

  • The unit is to be floor standing Cyclone pre-insulated pressurised Hot Water Cylinder
  • The cylinder is to be manufactured from Duplex LDX 2101
  • The cylinder must be tested to 10 bar with a maximum operating pressure of 5 bar
  • The cylinder should have a standing loss of no more than 115 W

Click here to see product fiche

If you have any queries at all or need anything clarified that this is the correct model for you then please contact us on 0818 888 000 prior to purchase.