PRO CLIMA Orcon F is a suitable bonding agent for all of the Pro Clima vapour checks and air-proofing membranes, PE/PA/PP and aluminum foils to other building materials regardless of smooth, rough or smooth stony surface.
Main purpose:
To create a flexible airtight and windtight seal between membranes and uneven surfaces.
Use it on:
Concrete, brick, plaster, timber, hard plastic, rust-proof metal, chipboard, OSB, plywood and MDF internally or externally.
This has exceptionally high adhesion properties, while also being elastic.
Outstanding adhesion to building materials, giving the joint the necessary safety and longevity.
High strength on building material substrates.
Airtight bonding in accordance with DIN 4108-7, SIA 180 and ÖNorm B8110-2.
Airtight outdoor joints e.g. vapour check for external roof insulation or sub-and-top refurbishment vapour check for re-roofing.
Wind-proof bonding of roof underlay and facade membranes.
Greater resistance to high humidity on site.
Orcon F Air Tightness Sealant features:
- High strength on building material substrates.
- Airtight bonding in accordance with DIN 4108-7, SIA 180 and ÖNorm B8110-2.
- Airtight outdoor joints, e.g. vapour check for external roof insulation or sub-and-top refurbishment vapour check for re-roofing.
- Wind-proof bonding of roof underlay and facade membranes.
- Greater resistance to high humidity on site.
- Super flexible
- Exceptionally high adhesion
- Use indoors & out
- Passive House certified component
- Low VOC rating
- Can be applied & stored when cold
- 310ml cartridge
Benefits
- Won’t crack or dry out so provides a permanent airtight seal; even when adjoined surfaces move over time.
- Provides a robust, reliable connection, perfect for rough & uneven surfaces, like timber & screed.
- Can be applied in temperatures as low as -20⁰C and remains airtight even in harsh weather conditions.
- Certification provides specifiers with confidence in Pro Clima systems.
- Low VOC emissions make it safe to apply.
- Frost resistant to -20 degrees Celsius, can be used at sub-zero temperatures.
Where to use it:
Pro Clima Orcon F airtight sealant can be used on concrete, brick, plaster, timber (smooth planed, rough sawn and painted), hard plastic, rust-proof metal, chipboard, OSB, plywood and MDF to seal all types of absorptive airtight and windtight membrane.
What it does:
Orcon F will permanently stick internal or external airtight and wind tight membranes to any surface commonly found on a building site.
It is commonly used and ideal for sealing airtight membranes (airtight vapour checks) to concrete floor surfaces.
With its high resistance to adverse weather conditions, the adhesive can be stored in low temperatures in the event of frost or freezing conditions (down to -20°C).
It can also be applied to plaster and concrete that has set but not yet fully dried.
When applying a 5-8mm bead of Orcon F: The 310ml cartridge can seal 6-15m.
The 600ml foil tube can seal 12-30m.
How it works:
The powerful acrylate based adhesive glue penetrates deep into surfaces ensuring an airtight adhesive bond is maintained at a molecular level.
Key Technical Data
- Application temperature (range) -10 °C to 50 °C
- Coverage (linear metres per can/tube) 8 m
Permanently sticks to:
Aluminium, Aluminium / foil membranes, Chipboard, Hard plastics, MDF, Metal, OSB, PE, PA, PP, PET and foil membranes, Painted timber, Plywood, Pro Clima membranes, Rough sawn timber, Smooth planed timber, Solid stone, brick or masonry
Sealing of:
Membrane edges and overlaps, Timber wall to masonry floor junction (in timber frame)
Size 310 ml
Temperature Resistance -40 °C to 80 °C
Warranty
10 years (when correctly installed with Pro Clima system products only), 6 years (when correctly installed with non-Pro Clima products)
