Passive House Systems airtight expanding foam from PHS & cleaner combi offer includes six 750ml cans of expanding foam, PHS foam cleaner, gun and protective glasses.
Professional grade airtight solution all in a handy box.
Airtight Expanding Foam from PHS :
Features:
- Heat Insulating creates a thermal insulation.
- Sound Insulating creates an airtight sound
- High Elastic
- Hardened foam is elastic, predominantly closed-cell, rot-proof, moisture-proof, temperature-resistant from -50°C to +100°C.
- Sticks to all common building materials, with the exception of polyethylene, silicone, oils and greases, mould release agents
- Can be processed at temperatures from +5°C to +30°C
- Resistant to aging, but not to UV radiation
Technical data:
- Foaming Liquid
- Colour: green
- Max application temp: 5 – 35 deg C
- Tack free time: 12 min
- Cutting Time: 25 min
- Curing Time: 12 hours
- Density of freely expanded foam: 12 – 18 kg/msq
- Foam yield of 750ml: 36 – 40 L
- Compression at 10%: 27kPa (dry), 22kPa (wet)
- Thermal Conductivity: 0.29 W/mk
Instructions for Use:
- The adhesive surfaces must be clean of dirt, dust and grease
- Shake the can thoroughly before use
- Slightly moisten the building connection joint with a water spray
- The optimal processing temperature is +20° C to +25°C
- Fill the joint no more than halfway, because the fresh foam expands to 2-3 times the initial volume
- Foam layers thicker than 5cm in several steps and allow each layer to harden
- The curing of the foam is supported and accelerated by additional moisture in the substrates (moistening of the substrates)
- For all joints, moistening is recommended after each layer of foam
- Insufficient supply of moisture or excessive moisture can lead to unwanted shrinkage of the foam
- Never press the partially hardened foam into the joint
- Remove fresh foam stains immediately with foam cleaner. This can only be done in the tack-free period. Hardened foam can only be removed with special cleaner or mechanically
Foam Cleaner from PHS:
Features:
- Cleans clothes, gun & surfaces
- Prevents foam cure
- Organic solvent mixture
- Removes fresh polyurethane foam
- Cleans uncured foam from windows & door frames
- Prevents foam cure in the gun adapter and aerosol valves
Instructions for Use:
- Wear protective glasses & gloves
- Before screwing the cleaner onto the gun connector, attach the plastic tube included
- Shake well and screw the aerosol tightly onto the gun adapter
- Press the trigger to flush the cleaner through the gun with several short shots for at least 5 seconds
- Rest for 15 minutes to allow cleaner to work
- Then flush the gun once more
- Unscrew and wipe the threads clean
- Caution: May damage plastic and other sensitive surfaces. Powerful solvent based aerosol cleaner
What’s in the box:
- x6 Airtight Expanding Foam from PHS
- Foam Cleaner from PHS
- Application Gun
- Protective Eyewear
