Airtight Expanding Foam Pack from PHS
€69.99 (Inc. VAT)
Passive House System Airtight Foam
Key features:
- PHS Airtight foam & Cleaner Combi Offer
- Expanding Foam
- Cleaning Technology
- Offer includes gun & protective eyewear
20 in stock
Product Description
Passive House Systems airtight expanding foam from PHS & cleaner combi offer includes six 750ml cans of expanding foam, PHS foam cleaner, gun and protective glasses. Professional grade airtight solution all in a handy box.
Airtight Expanding Foam from PHS :
Features:
- Heat Insulating creates a thermal insulation.
- Sound Insulating creates an airtight sound
- High Elastic
- Hardened foam is elastic, predominantly closed-cell, rot-proof, moisture-proof, temperature-resistant from -50°C to +100°C.
- Sticks to all common building materials, with the exception of polyethylene, silicone, oils and greases, mould release agents
- Can be processed at temperatures from +5°C to +30°C
- Resistant to aging, but not to UV radiation
Technical data:
- Foaming Liquid
- Colour: green
- Max application temp: 5 – 35 deg C
- Tack free time: 12 min
- Cutting Time: 25 min
- Curing Time: 12 hours
- Density of freely expanded foam: 12 – 18 kg/msq
- Foam yield of 750ml: 36 – 40 L
- Compression at 10%: 27kPa (dry), 22kPa (wet)
- Thermal Conductivity: 0.29 W/mk
Instructions for Use:
- The adhesive surfaces must be clean of dirt, dust and grease
- Shake the can thoroughly before use
- Slightly moisten the building connection joint with a water spray
- The optimal processing temperature is +20° C to +25°C
- Fill the joint no more than halfway, because the fresh foam expands to 2-3 times the initial volume
- Foam layers thicker than 5cm in several steps and allow each layer to harden
- The curing of the foam is supported and accelerated by additional moisture in the substrates (moistening of the substrates)
- For all joints, moistening is recommended after each layer of foam
- Insufficient supply of moisture or excessive moisture can lead to unwanted shrinkage of the foam
- Never press the partially hardened foam into the joint
- Remove fresh foam stains immediately with foam cleaner. This can only be done in the tack-free period. Hardened foam can only be removed with special cleaner or mechanically
Foam Cleaner from PHS:
Features:
- Cleans clothes, gun & surfaces
- Prevents foam cure
- Organic solvent mixture
- Removes fresh polyurethane foam
- Cleans uncured foam from windows & door frames
- Prevents foam cure in the gun adapter and aerosol valves
Instructions for Use:
- Wear protective glasses & gloves
- Before screwing the cleaner onto the gun connector, attach the plastic tube included
- Shake well and screw the aerosol tightly onto the gun adapter
- Press the trigger to flush the cleaner through the gun with several short shots for at least 5 seconds
- Rest for 15 minutes to allow cleaner to work
- Then flush the gun once more
- Unscrew and wipe the threads clean
- Caution: May damage plastic and other sensitive surfaces. Powerful solvent based aerosol cleaner
What’s in the box:
- x6 Airtight Expanding Foam from PHS
- Foam Cleaner from PHS
- Application Gun
- Protective Eyewear
Delivery charge information:
You can add any and all products to the basket and calculate your delivery charges easily. Simply enter your Eir Code and all applicable charges will be calculated automatically.
- Orders of €150 inc VAT or over will get free delivery nationwide. (Please see notes below for exceptions)
- All orders under €150 inc VAT incur a standard delivery charge of €10 including VAT
- (Please see below for exceptions)
- We deliver to anywhere in Ireland.
Bulky items:
Bulky items may incur delivery surcharges (see below) as extra courier costs unfortunately are often unavoidable. If the order is over €150 only the bulk delivery charge will apply. The final delivery charge for bulky products will be calculated when all items have been added to the shopping cart.
All efforts are made to indicate where products are subject to delivery surcharges.
Special Order items:
We are in regular contact with our suppliers and we try our best to make sure that all “special order items” on our webstore are available from our suppliers within the timeframe advertised. If, for some reason our supplier is out of stock and you have ordered the product we will let you know immediately and give you the option to either wait until it’s back in, upgrade to a better model at little or no extra cost or receive a full refund. See more info on Special Order products here.
Timeframe:
All nationwide deliveries will be delivered within 2-3 working days.
(Local deliveries within 1-2 working days.)
Special order items may take longer to deliver but this will be indicated on the product information page. You can see more info on Special Order products here.
Working days are Monday through Friday excluding public holidays. Orders placed on Saturday/Sunday will be deemed as being placed on the following Monday.
Some items may take longer to ship. If this is the case, we will notify you by phone/email of this delay.
If your delivery is urgent please contact us by phone or email and we will do our best to expedite it.
Please indicate on your order any specific delivery instructions.
Bulky goods:
Bulky goods will be delivered on pallets and will be unloaded by the courier. All bulky goods are delivered kerbside. Unfortunately, the delivery company will not convey the goods into premises for storage unless agreed in advance. Access to the delivery location must be suitable for a truck and failure to provide suitable level ground for operating pallet truck may result in refusal to deliver by the courier. Please note delivery operators will apply safe procedures in relation to ongoing Public Health considerations..
Exceptional Goods:
Some building materials are extremely bulky and not practical to deliver outside Co. Sligo e.g. concrete blocks, tonne bags of sand or gravel or some lengths of timber. We have highlighted where this is the case in bold red writing. If you do order these products we will contact you to see if you want to pay an additional delivery charge or if you wish to cancel the order. Please do not take offence to this as some bulky goods may cost much more to deliver than the value of the goods. We are based in Sligo so can offer a local delivery service in this area using our own vehicles.
If there is a forklift or teleporter available onsite, we would appreciate if you could tell us in advance by filling out the special delivery notes when completing the order.
The Seller or the courier company will not be held responsible for any damage to goods or persons caused by the goods being unloaded by the buyer.
**Please contact us in advance of ordering if unsure of the above**
Damaged goods:
Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to sales@mybuildingsupplies.ie straight away. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.
Once the goods are signed for it will be deemed that goods were in good state when delivered.
General:
Delivery shall be within a time period agreed between the Buyer and Seller and the Seller shall use its best endeavours to ensure that delivery takes place within the period agreed. Failure by the Seller to deliver the Goods within the agreed time period shall not amount to a breach of this contract by the Seller and the Buyer shall not be entitled to damages or other compensation or to cancel this contact by reason of such failure.
The Seller reserves the right to deliver in instalments. Each part delivery shall be deemed to constitute a separate contract, the fulfilment or non-fulfilment of which shall not affect any other part of the contract or the contract as a whole. Where any order involves more than one delivery and default is made on payment on the due date (either under this contract or any other contract made between the Seller and the Buyer) the Seller shall have the right to suspend all further deliveries until payment is made or to terminate the contract without prejudice to any existing claim.
The Seller shall not be liable to the Buyer for any loss or damage which may be suffered by the Buyer as a direct or indirect result of the supply of the Goods by the Seller being prevented, hindered or delayed by reason of any circumstances whatsoever which are outside the control of the Seller. Once delivery has been accepted the Buyer shall not be entitled to withhold or postpone payment of all or any portion of the price agreed, therefore.
1. Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to sales@mybuildingsupplies.ie. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.
2. If goods are signed for and later found to be faulty/damaged, notice must be given in writing within 24 hours and photos will be required to be emailed to sales@mybuildingsupplies.ie.
3. All faulty/damaged goods issues will be dealt with on a case by case basis and best endeavours will be made to rectify within a timely manner. Manufacturers’ warranties will apply in certain cases.
4. Any returned items which are not faulty or damaged will incur full carriage costs which must be paid for by the customer. Notice of intention to return unwanted goods must be given within 14 days of receiving goods. Returned goods must be in original packaging and in original condition before refunds can be given.
5. All returned goods to be sent to Patrick Rogers Ltd., O’Connell St., Ballymote, Co. Sligo
Note regarding Oil Boilers and Boiler stoves:
Please ensure you check with us first or consult a qualified professional before ordering your oil boiler or boiler stove to ensure you order the correct one for your home. If the product needs to be returned a restocking fee may apply.
Returns of Special Order Items
All “special order items” are subject to the same product returns policy as stocked items. However, items which are returned that are not faulty or damaged on delivery will be subject to a 10% restocking fee.
You may also like…
-
Airtight Sealant Gerband Fortax 6400 (310ml)
Airtight Sealant for air tightness layers
Key features:
- High quality sealant used for connecting air tightness layers permanently
- Also suitable for connecting all types of standard vapour barriers
- For internal use
- 310ml cartridge and compatible with standard application gun
- Ideal for Trades people and for DIY
€9.65 (Inc. VAT) -
Air Tight Membrane – Gerband SD (75m2)
Gerband SD Air Tight Membrane and Vapour Control Barrier
Key features:
- High quality membrane that enables air tightness and vapour control
- Used in walls and roof
- In winter it reliably prevents diffusion of interior humidity into the roof and wall construction
- In summer it allows for back fusion from the insulation as well as the wall and roof construction
- This prevents condensation that facilitates mildew growth and constructional damages
- Double layered
€144.99 (Inc. VAT) -
PHS Loft Stairs Hood
Passive House System Loft Stairs Hood
Key features:
- PHS Attic Stair Cover is an easy solution to insulate attic stairs while maintaining easy access to your attic.
- Airtight – Eliminates draughts through your attic stairs
- Insulating – prevents heat escaping through the loft
- Flexible & lightweight
- Simple to install
- Two heavy duty zips
- Highly durable, insulated and double radiant fabric
€72.95 (Inc. VAT)
Reviews
There are no reviews yet.