Unilin Cavity Wall Insulation Tongue & Groove 100mm
€51.65 (Inc. VAT)
Unilin (previously Xtratherm) Cavity T&G 100mm 2.16m2 – Insulation for Partial Fill Cavity Walls – XT/CW (T&G)
Key features:
- Tongue & Groove
- Trusted brand
- 100mm thick and 2.16 sq m per bale
- Ideal for Trades people and for DIY
- Unilin was previously known as Xtratherm
Available on backorder
Product Description
Thin-R Partial Fill Cavity Wall XT/CW (T&G) builds to a system thanks to its engineered tongue and groove joints and pre-formed corners, ensuring insulation continuity and minimisation of thermal bridging.
XT/CW (T&G) for use in traditional masonry walls, builds to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain.
- Thermal Conductivity is 0.022 W/m²·k (BS EN 13165:2008)
- Thermal Resistance for this 100mm T&G is 4.50 W/m²·k
Unilin (previously Xtratherm) Cavity Wall Insulation Tongue and Groove features:
- Robust Tongue & Groove Jointing
- Corner Panels & Cavity Closers: Reduced Thermal Bridging
- Clear Cavity Maintained
- Each board is 1200mm long x 450mm wide
- There are four boards per bale and the total coverage per bale is 2.16mw
- No Exposure Restrictions
- Low Emissivity Foil Facings
- Compressive Strength > 120 (kPa)
- Reaction to fire: NPD
- See the Product Brochure and Installation Instructions here
- See the Declaration of Performance here
- If you require very large quantities then you can call us on 0818 888 000 or open up the live chat on our website and we can provide a separate quotation for very large quantities.
The Unilin (previously Xtratherm) Cavity Wall System includes an optional pre-formed corner panel (XT/CRN) that folds to 90 degrees to effectively insulate a corner junction that is normally vulnerable to thermal bridging and cold spots.
The XT/CW (T&G) tongue and groove jointing offer a practical on-site solution that results in a more robust continuous layer of insulation, minimising the threat of thermal bridging and improving the overall U-Value of the wall.
The low emissivity foil facing on XT/CW (T&G) improves the thermal performance of the wall. The residual cavity is the most effective method of preventing wind-driven rain from penetrating a wall from the outside.
A residual cavity is the air space that remains when XT/CW (T&G) is placed against the inner leaf of the cavity of a wall. The recommended residual cavity width required is 50mm in accordance with agrément certification, however, a reduced cavity may be permissible in certain circumstances.
Handling, Cutting and Storage
Xtratherm insulation should be stored off the ground, on a clean flat surface and must be stored undercover. Polythene wrapping is not considered adequate protection for outside exposure. Care should be taken to protect the insulation in storage and during the build process.
The insulation boards can be readily cut using a sharp knife or fine toothed saw. Ensure tight fitting of the insulation boards to achieve continuity of insulation as asked for within the ACDs.
Appropriate PPE should be worn when handling insulation. Please refer to Health & Safety data sheets on the manufacturer website. The boards are wrapped in polythene packs and each pack is labelled with details of grade/type, size and number of pieces per pack.
Durability
Xtratherm products are stable, rot-proof and will remain effective for the life span of the building, dependent on specification and installation. Care should be taken to avoid contact with acids, petrol, alkalis and mineral oil, when contact is made, clean materials in a safe manner before installation.
If you need any help with this Unilin (previously Xtratherm) Cavity T&G insulation then just call our helpful and friendly team today on 0818 888 000 or open up the live chat and we will help in every way we can.
- Note: Delivery of this bulky product is available Nationwide but will be subject to a bulk delivery charge. Delivery charges are calculated during checkout according to the delivery address provided.
Should you require very large volumes of this product then we may be able to improve your delivery charge. To discuss this you can call us on 0818 888 000 for more information and confirm pricing.
Delivery charge information:
You can add any and all products to the basket and calculate your delivery charges easily. Simply enter your Eir Code and all applicable charges will be calculated automatically.
- Orders of €150 inc VAT or over will get free delivery nationwide. (Please see notes below for exceptions)
- All orders under €150 inc VAT incur a standard delivery charge of €10 including VAT
- (Please see below for exceptions)
- We deliver to anywhere in Ireland.
Bulky items:
Bulky items may incur delivery surcharges (see below) as extra courier costs unfortunately are often unavoidable. If the order is over €150 only the bulk delivery charge will apply. The final delivery charge for bulky products will be calculated when all items have been added to the shopping cart.
All efforts are made to indicate where products are subject to delivery surcharges.
Special Order items:
We are in regular contact with our suppliers and we try our best to make sure that all “special order items” on our webstore are available from our suppliers within the timeframe advertised. If, for some reason our supplier is out of stock and you have ordered the product we will let you know immediately and give you the option to either wait until it’s back in, upgrade to a better model at little or no extra cost or receive a full refund. See more info on Special Order products here.
Timeframe:
All nationwide deliveries will be delivered within 2-3 working days.
(Local deliveries within 1-2 working days.)
Special order items may take longer to deliver but this will be indicated on the product information page. You can see more info on Special Order products here.
Working days are Monday through Friday excluding public holidays. Orders placed on Saturday/Sunday will be deemed as being placed on the following Monday.
Some items may take longer to ship. If this is the case, we will notify you by phone/email of this delay.
If your delivery is urgent please contact us by phone or email and we will do our best to expedite it.
Please indicate on your order any specific delivery instructions.
Bulky goods:
Bulky goods will be delivered on pallets and will be unloaded by the courier. All bulky goods are delivered kerbside. Unfortunately, the delivery company will not convey the goods into premises for storage unless agreed in advance. Access to the delivery location must be suitable for a truck and failure to provide suitable level ground for operating pallet truck may result in refusal to deliver by the courier. Please note delivery operators will apply safe procedures in relation to ongoing Public Health considerations..
Exceptional Goods:
Some building materials are extremely bulky and not practical to deliver outside Co. Sligo e.g. concrete blocks, tonne bags of sand or gravel or some lengths of timber. We have highlighted where this is the case in bold red writing. If you do order these products we will contact you to see if you want to pay an additional delivery charge or if you wish to cancel the order. Please do not take offence to this as some bulky goods may cost much more to deliver than the value of the goods. We are based in Sligo so can offer a local delivery service in this area using our own vehicles.
If there is a forklift or teleporter available onsite, we would appreciate if you could tell us in advance by filling out the special delivery notes when completing the order.
The Seller or the courier company will not be held responsible for any damage to goods or persons caused by the goods being unloaded by the buyer.
**Please contact us in advance of ordering if unsure of the above**
Damaged goods:
Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to sales@mybuildingsupplies.ie straight away. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.
Once the goods are signed for it will be deemed that goods were in good state when delivered.
General:
Delivery shall be within a time period agreed between the Buyer and Seller and the Seller shall use its best endeavours to ensure that delivery takes place within the period agreed. Failure by the Seller to deliver the Goods within the agreed time period shall not amount to a breach of this contract by the Seller and the Buyer shall not be entitled to damages or other compensation or to cancel this contact by reason of such failure.
The Seller reserves the right to deliver in instalments. Each part delivery shall be deemed to constitute a separate contract, the fulfilment or non-fulfilment of which shall not affect any other part of the contract or the contract as a whole. Where any order involves more than one delivery and default is made on payment on the due date (either under this contract or any other contract made between the Seller and the Buyer) the Seller shall have the right to suspend all further deliveries until payment is made or to terminate the contract without prejudice to any existing claim.
The Seller shall not be liable to the Buyer for any loss or damage which may be suffered by the Buyer as a direct or indirect result of the supply of the Goods by the Seller being prevented, hindered or delayed by reason of any circumstances whatsoever which are outside the control of the Seller. Once delivery has been accepted the Buyer shall not be entitled to withhold or postpone payment of all or any portion of the price agreed, therefore.
1. Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to sales@mybuildingsupplies.ie. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.
2. If goods are signed for and later found to be faulty/damaged, notice must be given in writing within 24 hours and photos will be required to be emailed to sales@mybuildingsupplies.ie.
3. All faulty/damaged goods issues will be dealt with on a case by case basis and best endeavours will be made to rectify within a timely manner. Manufacturers’ warranties will apply in certain cases.
4. Any returned items which are not faulty or damaged will incur full carriage costs which must be paid for by the customer. Notice of intention to return unwanted goods must be given within 14 days of receiving goods. Returned goods must be in original packaging and in original condition before refunds can be given.
5. All returned goods to be sent to Patrick Rogers Ltd., O’Connell St., Ballymote, Co. Sligo
Note regarding Oil Boilers and Boiler stoves:
Please ensure you check with us first or consult a qualified professional before ordering your oil boiler or boiler stove to ensure you order the correct one for your home. If the product needs to be returned a restocking fee may apply.
Returns of Special Order Items
All “special order items” are subject to the same product returns policy as stocked items. However, items which are returned that are not faulty or damaged on delivery will be subject to a 10% restocking fee.
You may also like…
-
Shop options This product has multiple variants. The options may be chosen on the product page
Spaceloft Aerogel Strip Insulation for Posts, Windows & Doors
€18.33 – €28.98 (Inc. VAT)Spaceloft Aerogel Strip Insulation for Posts, Windows & Doors
Insulate Steel Posts, Door Frames and Window Frames with Spaceloft Aerogel Strips
Key features:
- For insulation of steel posts
- Ideal for use in frames in Bay Windows
- Also used to insulate Door Frames
- Eliminates Cold Bridge and prevents mould
€18.33 – €28.98 (Inc. VAT) -
Shop options This product has multiple variants. The options may be chosen on the product page
Expansion Foam Roll
€38.51 – €50.60 (Inc. VAT)Expansion Foam Roll
Fosroc Expandafoam
Key features:
- Efficient solution for expansion joints
- Ready to use
- Light and esay handling
€38.51 – €50.60 (Inc. VAT)
Reviews
There are no reviews yet.