skip to Main Content

Local and County Sligo orders made before 12.00 pm Wednesday 21st December will be delivered before 1.00 pm on Friday 23rd December. All nationwide orders made before midnight on Monday 19th December will be dispatched prior to Christmas. All orders made after that will be processed from 3rd January onwards. Happy Christmas!

Free Delivery over €150

Excluding Bulk Delivery

100% Irish Business

Trading in Ireland since 1870.

Trade Discounts available

Save money & time

Air Tightness Tape for Joining & Sealing Argo (25m)

16.99 (Inc. VAT)

Delivery time: 2-3 days
Rated 0 out of 5
(be the first to review)

Passive House Systems Argo Joint Tape – 60mm x 25metres

Key features:

  • High quality universal air tightness tape
  • Perfect for sealing membrane overlaps, joints, connections and penetrations
  • Has a low-density polyethylene film backing
  • Very pliable and stretchable
  • Each roll is 60mm wide and 25 metres long

24 in stock

Product Description

Argo Joint Air Tightness Tape from Passive House Systems is a high quality air tightness tape that is perfect for sealing membrane overlaps, joints, connections and penetrations. It has a low density polyethylene film backing and offers a permanent adhesion with high initial tack. It is pliable and stretchable so is very easy to work with and suitable for use with all air tightness membranes and vapour control layers. You can also apply it to a variety of different substrates and their material transitions while ensuring optimum airtight sealing.

Key features:

  • High quality universal air tightness tape
  • Perfect for sealing membrane overlaps, joints, connections and penetrations
  • Has a low-density polyethylene film backing
  • Very pliable and stretchable
  • Each roll is 60mm wide and 25 metres long

Argo Joint air tightness tape complies with the high requirements of permanent bonding of airtight layers as per the EnEV and DIN 4108 part 7 regarding the permanent airtight sealing of vapor barrier sheeting.

Suitable Substrates

  • Wood
  • Sheeting boards (OSB)
  • Metals
  • Electric cables
  • Gypsum fibreboards
  • Plasterboards

How to use this:

PHS Argo Joint Tape is used indoors for the air-tight bonding and sealing of penetrations and overlaps of wind and vapor barriers according to BS 9250.
Surfaces must be stable, dry, free of grease and dust, and may not contain adhesive-repellent coating.

We recommend bonding to surfaces such as smooth or slightly rough PE webs and non-waxed kraft paper. Aluminum sheeting, PP fleece, and wooden sheathing (e.g. oriented strand boards) may also be used.

For bonding MDF boards we recommend preconditioning the surfaces with Gerband Primer 6300. PHS Argo Joint Tape may also be used in non-visible areas of building components and also on impact resistant plastics (pipes, windows), wood or metal.

Technical specification:

  • Base Material:                                    LD-polyethylene foil, stretchy, green
  • Adhesive:                                           Acrylate dispersion, solvent free
  • Adhesive middle layer:                      Polyester lattice layer
  • Covering material:                             Silicon paper, brown
  • Thickness (without covering):            0.28mm
  • Adhesive layer:                                   210g / m2
  • Adhesive strength:                             35N / 25mm DIN EN 1939
  • Temperature resistance:                    –40C to +80C
  • UV resistance:                                    Max. 3 months
  • Durability against ageing:                  Excellent
  • Moisture resistance:                           Excellent
  • Processing temperature:                    Recommended from +5C to +40C Possible from –10C
  • Size:                                                    60mm x 25 metres



There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Delivery charge information:

You can add any and all products to the basket and calculate your delivery charges easily. Simply enter your Eir Code and all applicable charges will be calculated automatically.

  • Orders of €150 inc VAT or over will get free delivery nationwide. (Please see notes below for exceptions)
  • All orders under €150 inc VAT incur a standard delivery charge of €10 including VAT
  • (Please see below for exceptions)
  • We deliver to anywhere in Ireland.

Bulky items:

Bulky items may incur delivery surcharges (see below) as extra courier costs unfortunately are often unavoidable. If the order is over €150 only the bulk delivery charge will apply. The final delivery charge for bulky products will be calculated when all items have been added to the shopping cart.
All efforts are made to indicate where products are subject to delivery surcharges.

Special Order items:

We are in regular contact with our suppliers and we try our best to make sure that all “special order items” on our webstore are available from our suppliers within the timeframe advertised. If, for some reason our supplier is out of stock and you have ordered the product we will let you know immediately and give you the option to either wait until it’s back in, upgrade to a better model at little or no extra cost or receive a full refund. See more info on Special Order products here.


All nationwide deliveries will be delivered within 2-3 working days.

(Local deliveries within 1-2 working days.)

Special order items may take longer to deliver but this will be indicated on the product information page. You can see more info on Special Order products here.

Working days are Monday through Friday excluding public holidays. Orders placed on Saturday/Sunday will be deemed as being placed on the following Monday.

Some items may take longer to ship. If this is the case, we will notify you by phone/email of this delay.

If your delivery is urgent please contact us by phone or email and we will do our best to expedite it.

Please indicate on your order any specific delivery instructions.

Bulky goods:

Bulky goods will be delivered on pallets and will be unloaded by the courier. All bulky goods are delivered kerbside. Unfortunately, the delivery company will not convey the goods into premises for storage unless agreed in advance. Access to the delivery location must be suitable for a truck and failure to provide suitable level ground for operating pallet truck may result in refusal to deliver by the courier. Please note delivery operators will apply safe procedures in relation to ongoing Public Health considerations..

Exceptional Goods:

Some building materials are extremely bulky and not practical to deliver outside Co. Sligo e.g. concrete blocks, tonne bags of sand or gravel or some lengths of timber. We have highlighted where this is the case in bold red writing. If you do order these products we will contact you to see if you want to pay an additional delivery charge or if you wish to cancel the order. Please do not take offence to this as some bulky goods may cost much more to deliver than the value of the goods. We are based in Sligo so can offer a local delivery service in this area using our own vehicles.

If there is a forklift or teleporter available onsite, we would appreciate if you could tell us in advance by filling out the special delivery notes when completing the order.

The Seller or the courier company will not be held responsible for any damage to goods or persons caused by the goods being unloaded by the buyer.

**Please contact us in advance of ordering if unsure of the above**

Damaged goods:

Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to straight away. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.

Once the goods are signed for it will be deemed that goods were in good state when delivered.


Delivery shall be within a time period agreed between the Buyer and Seller and the Seller shall use its best endeavours to ensure that delivery takes place within the period agreed. Failure by the Seller to deliver the Goods within the agreed time period shall not amount to a breach of this contract by the Seller and the Buyer shall not be entitled to damages or other compensation or to cancel this contact by reason of such failure.

The Seller reserves the right to deliver in instalments. Each part delivery shall be deemed to constitute a separate contract, the fulfilment or non-fulfilment of which shall not affect any other part of the contract or the contract as a whole. Where any order involves more than one delivery and default is made on payment on the due date (either under this contract or any other contract made between the Seller and the Buyer) the Seller shall have the right to suspend all further deliveries until payment is made or to terminate the contract without prejudice to any existing claim.

The Seller shall not be liable to the Buyer for any loss or damage which may be suffered by the Buyer as a direct or indirect result of the supply of the Goods by the Seller being prevented, hindered or delayed by reason of any circumstances whatsoever which are outside the control of the Seller. Once delivery has been accepted the Buyer shall not be entitled to withhold or postpone payment of all or any portion of the price agreed, therefore.

1. Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.

2.  If goods are signed for and later found to be faulty/damaged, notice must be given in writing within 24 hours and photos will be required to be emailed to

3. All faulty/damaged goods issues will be dealt with on a case by case basis and best endeavours will be made to rectify within a timely manner. Manufacturers’ warranties will apply in certain cases.

4. Any returned items which are not faulty or damaged will incur full carriage costs which must be paid for by the customer.  Notice of intention to return unwanted goods must be given within 14 days of receiving goods. Returned goods must be in original packaging and in original condition before refunds can be given.

5. All returned goods to be sent to Patrick Rogers Ltd., O’Connell St., Ballymote, Co. Sligo

Note regarding Oil Boilers and Boiler stoves:

Please ensure you check with us first or consult a qualified professional before ordering your oil boiler or boiler stove to ensure you order the correct one for your home. If the product needs to be returned a restocking fee may apply.

Returns of Special Order Items

All “special order items” are subject to the same product returns policy as stocked items. However, items which are returned that are not faulty or damaged on delivery will be subject to a 10% restocking fee.

You may also like…

  • Split Release Air Tightness Tape for doors & windows

    Split Release Air Tightness Tape from Passive House Systems

    Key features:

    • Designed to be used indoors, for the airtight bonding and sealing of door and window reveals
    • Choice of widths and size of split available
    • Airtight, pliable and stretchable
    • Split release tape permits the installer to quickly apply it to the window frame and reveal in separate and manageable steps
    30.9954.99 (Inc. VAT)
  • Out of Stock

    Fusion Variable Plus Window Air Tightness Tape

    82.95102.95 (Inc. VAT)
    Shop options

    Fusion Variable Plus Window Air Tightness Tape

    Fusion Variable Plus Air Tight Tape

    Key features:

    • High quality air tightness tape with variable SD values
    • For fast and reliable sealing of window and door reveals
    • Protects against interstitial condensation by having a variable SD membrane value
    • In the winter the tape becomes more vapour closed (Sd = 20m) to prevent moisture travelling into the building fabric and condensing due to the reduced temperature
    • In the summer the tape becomes more vapour open (Sd = 0.1m) to allow any moisture that infiltrated the wall in the winter to dry out internally
    82.95102.95 (Inc. VAT)
  • Air Tight Membrane – Gerband SD (75m2)

    Gerband SD Air Tight Membrane and Vapour Control Barrier

    Key features:

    • High quality membrane that enables air tightness and vapour control
    • Used in walls and roof
    • In winter it reliably prevents diffusion of interior humidity into the roof and wall construction
    • In summer it allows for back fusion from the insulation as well as the wall and roof construction
    • This prevents condensation that facilitates mildew growth and constructional damages
    • Double layered
    149.99 (Inc. VAT)
  • Air Tight Membrane – Vapour Control Layer – Intello Plus Vapour Check Barrier 75m2

    Intello Air Tightness Membrane – 75 square metres

    Key features:

    • Leading Vapour Control Barrier
    • Airtight membrane that reacts to humidity
    • Easy to install and fully recyclable
    • Allows up to 100 times more moisture vapour to pass through when humidity is high
    • Lasting protection against mould growth and moisture related structural damage.
    266.33 (Inc. VAT)