skip to Main Content

Local and County Sligo orders made before 12.00 pm Wednesday 21st December will be delivered before 1.00 pm on Friday 23rd December. All nationwide orders made before midnight on Monday 19th December will be dispatched prior to Christmas. All orders made after that will be processed from 3rd January onwards. Happy Christmas!

Free Delivery over €150

Excluding Bulk Delivery

100% Irish Business

Trading in Ireland since 1870.

Trade Discounts available

Save money & time

Fire Cavity Barrier

6.49 (Inc. VAT)

Bulk Product
Delivery time: 2-3 days
Rated 0 out of 5
(be the first to review)

Cavity Wall Fire Barriers

Key features:

  • Work to improve a building’s safety by preventing the spread of fire within concealed voids
  • Developed to exceed Building Regulations
  • Not affected by movement in the building
  • Used to prevent the spread of fire in concealed voids
  • Durable and robust

Product Description

Installing TCB fire cavity barrier or PWCB cavity barrier, provides essential protection also helping to minimise air leakage and heat loss between the external cavity and the separating party wall. By specifying and installing the TCB Fire Cavity Barrier or PWCB Cavity Barrier, they provide essential protection whilst also helping to minimise air leakage and heat loss between the external cavity and the separating party wall.

ROCKWOOL TCB Fire Cavity Barrier and PWCB Cavity Barrier products have been created to provide excellent levels of fire protection for both timber frame and masonry properties. They have been designed to meet the minimum building regulation requirements for fire resistance in concealed wall cavities, having been tested and assessed for up to 60 minutes’ integrity and insulation, thereby exceeding minimum requirements.

These cavity wall insulation products have been created from non-combustible stone wool and wrapped within a resilient polythene sleeve which acts to provide weather protection during installation. The sleeves are also colour-coded to differentiate between the two products, the TCB’s are red and the PWCB’s are white. An all in one solution, the ROCKWOOL PWCB cavity barrier also achieves the trilogy of requirements for fire safety, acoustic flanking and thermal bypass in one single product whilst providing effective perimeter edge sealing, reducing the leaking of air and associated heat loss.

Accreditations:

  • Approved by the loss Prevention Certification board (lPCb) for performance and quality. 1991 (2000 edition)
  • Tested and assessed for up to 60 minutes fire resistance (integrity and insulation) in accordance with BS 476: Part 20
  • Fire protection – ROCKWOOL TCB Cavity Barrier and PWCB Cavity Barrier products have been developed to exceed minimum Building Regulation requirements for fire resistance within concealed wall cavities.
  • Resilient performance – the TCB Cavity Barrier and PWCB Cavity Barrier is not affected by movement in a building, shrinkage or thermal change.
  • Durable – the barriers will withstand on-site handling and once installed will last the lifetime of the structure
  • A vertical or horizontal solution – ROCKWOOL Cavity Barriers can be used in both vertical and horizontal applications. In vertical applications, both flanges of the Cavity Barrier can be fixed to the inner leaf at 150mm centres, using staples or clout nails prior to compression fitting by outer cavity wall. In horizontal applications, only the top flange of the polythene sleeve should be fixed.
  • Acoustic protection – ROCKWOOL Cavity Barriers prevent flanking noise transmission, along concealed cavities in both external and separating walls.

Key features:

  • The fire resistance is up to 60 minutes.
  • TCB Cavity Barrier has been developed to exceed minimum building regulations.
  • TCB Cavity Barrier is not affected by movement in a building
  • Durable

You can see the installation guide here

You can see the datasheet here

Reviews

There are no reviews yet.

Leave a customer review

Your email address will not be published. Required fields are marked *

Delivery charge information:

You can add any and all products to the basket and calculate your delivery charges easily. Simply enter your Eir Code and all applicable charges will be calculated automatically.

  • Orders of €150 inc VAT or over will get free delivery nationwide. (Please see notes below for exceptions)
  • All orders under €150 inc VAT incur a standard delivery charge of €10 including VAT
  • (Please see below for exceptions)
  • We deliver to anywhere in Ireland.

Bulky items:

Bulky items may incur delivery surcharges (see below) as extra courier costs unfortunately are often unavoidable. If the order is over €150 only the bulk delivery charge will apply. The final delivery charge for bulky products will be calculated when all items have been added to the shopping cart.
All efforts are made to indicate where products are subject to delivery surcharges.

Special Order items:

We are in regular contact with our suppliers and we try our best to make sure that all “special order items” on our webstore are available from our suppliers within the timeframe advertised. If, for some reason our supplier is out of stock and you have ordered the product we will let you know immediately and give you the option to either wait until it’s back in, upgrade to a better model at little or no extra cost or receive a full refund. See more info on Special Order products here.

Timeframe:

All nationwide deliveries will be delivered within 2-3 working days.

(Local deliveries within 1-2 working days.)

Special order items may take longer to deliver but this will be indicated on the product information page. You can see more info on Special Order products here.

Working days are Monday through Friday excluding public holidays. Orders placed on Saturday/Sunday will be deemed as being placed on the following Monday.

Some items may take longer to ship. If this is the case, we will notify you by phone/email of this delay.

If your delivery is urgent please contact us by phone or email and we will do our best to expedite it.

Please indicate on your order any specific delivery instructions.

Bulky goods:

Bulky goods will be delivered on pallets and will be unloaded by the courier. All bulky goods are delivered kerbside. Unfortunately, the delivery company will not convey the goods into premises for storage unless agreed in advance. Access to the delivery location must be suitable for a truck and failure to provide suitable level ground for operating pallet truck may result in refusal to deliver by the courier. Please note delivery operators will apply safe procedures in relation to ongoing Public Health considerations..

Exceptional Goods:

Some building materials are extremely bulky and not practical to deliver outside Co. Sligo e.g. concrete blocks, tonne bags of sand or gravel or some lengths of timber. We have highlighted where this is the case in bold red writing. If you do order these products we will contact you to see if you want to pay an additional delivery charge or if you wish to cancel the order. Please do not take offence to this as some bulky goods may cost much more to deliver than the value of the goods. We are based in Sligo so can offer a local delivery service in this area using our own vehicles.

If there is a forklift or teleporter available onsite, we would appreciate if you could tell us in advance by filling out the special delivery notes when completing the order.

The Seller or the courier company will not be held responsible for any damage to goods or persons caused by the goods being unloaded by the buyer.

**Please contact us in advance of ordering if unsure of the above**

Damaged goods:

Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to sales@mybuildingsupplies.ie straight away. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.

Once the goods are signed for it will be deemed that goods were in good state when delivered.

General:

Delivery shall be within a time period agreed between the Buyer and Seller and the Seller shall use its best endeavours to ensure that delivery takes place within the period agreed. Failure by the Seller to deliver the Goods within the agreed time period shall not amount to a breach of this contract by the Seller and the Buyer shall not be entitled to damages or other compensation or to cancel this contact by reason of such failure.

The Seller reserves the right to deliver in instalments. Each part delivery shall be deemed to constitute a separate contract, the fulfilment or non-fulfilment of which shall not affect any other part of the contract or the contract as a whole. Where any order involves more than one delivery and default is made on payment on the due date (either under this contract or any other contract made between the Seller and the Buyer) the Seller shall have the right to suspend all further deliveries until payment is made or to terminate the contract without prejudice to any existing claim.

The Seller shall not be liable to the Buyer for any loss or damage which may be suffered by the Buyer as a direct or indirect result of the supply of the Goods by the Seller being prevented, hindered or delayed by reason of any circumstances whatsoever which are outside the control of the Seller. Once delivery has been accepted the Buyer shall not be entitled to withhold or postpone payment of all or any portion of the price agreed, therefore.

1. Where goods are damaged on delivery the Buyer has the right to refuse delivery. Damaged goods should be photographed on delivery and photos emailed to sales@mybuildingsupplies.ie. If goods are damaged on delivery, we will replace the goods in as timely a manner as possible at no extra cost.

2.  If goods are signed for and later found to be faulty/damaged, notice must be given in writing within 24 hours and photos will be required to be emailed to sales@mybuildingsupplies.ie.

3. All faulty/damaged goods issues will be dealt with on a case by case basis and best endeavours will be made to rectify within a timely manner. Manufacturers’ warranties will apply in certain cases.

4. Any returned items which are not faulty or damaged will incur full carriage costs which must be paid for by the customer.  Notice of intention to return unwanted goods must be given within 14 days of receiving goods. Returned goods must be in original packaging and in original condition before refunds can be given.

5. All returned goods to be sent to Patrick Rogers Ltd., O’Connell St., Ballymote, Co. Sligo

Note regarding Oil Boilers and Boiler stoves:

Please ensure you check with us first or consult a qualified professional before ordering your oil boiler or boiler stove to ensure you order the correct one for your home. If the product needs to be returned a restocking fee may apply.

Returns of Special Order Items

All “special order items” are subject to the same product returns policy as stocked items. However, items which are returned that are not faulty or damaged on delivery will be subject to a 10% restocking fee.

You may also like…

  • Air Tight Membrane – Vapour Control Layer – Intello Plus Vapour Check Barrier 75m2

    Intello Air Tightness Membrane – 75 square metres

    Key features:

    • Leading Vapour Control Barrier
    • Airtight membrane that reacts to humidity
    • Easy to install and fully recyclable
    • Allows up to 100 times more moisture vapour to pass through when humidity is high
    • Lasting protection against mould growth and moisture related structural damage.
    266.00 (Inc. VAT)
  • PIR Insulation Full Fill Cavity Wall Insulation 125mm

    Unilin (previously Xtratherm) CavityTherm PIR Insulation (CT/PIR) 125mm

    Key features:

    • High quality PIR Insulation
    • Trusted brand
    • 125mm thick and 2.16 sqm total coverage
    • Ideal for Trades people and for DIY
    • Unilin was previously known as Xtratherm
    71.41 (Inc. VAT)
  • Unilin Cavity Wall Insulation Tongue & Groove 100mm

    Unilin (previously Xtratherm) Cavity T&G 100mm 2.16m2 – Insulation for Partial Fill Cavity Walls – XT/CW (T&G)

    Key features:

    • Tongue & Groove
    • Trusted brand
    • 100mm thick and 2.16 sq m per bale
    • Ideal for Trades people and for DIY
    • Unilin was previously known as Xtratherm
    51.65 (Inc. VAT)
  • Insulated Plasterboard – Unilin PIR Thermal Liner Insulation

    Thin-R Thermal Liner Insulated Plasterboard

    Key features:

    • Insulation and drylining in one application
    • Composite panels
    • Vapour control layer
    • High quality product
    • Unilin was previously known as Xtratherm
    43.9982.34 (Inc. VAT)
X